This is not necessarily a straightforward question. If you are already familiar with running programs from the Windows command line then everything will seem obvious; otherwise, you might need a little more guidance. There are also differences between Windows 95, 98, NT, ME, 2000 and XP which can add to the confusion.
Unless you use some sort of integrated development environment, you will end up typing Windows commands into what is variously referred to as a “DOS window” or “Command prompt window”. Usually you can create such a window from your Start menu; under Windows 2000 the menu selection is Start ‣ Programs ‣ Accessories ‣ Command Prompt. You should be able to recognize when you have started such a window because you will see a Windows “command prompt”, which usually looks like this:
The letter may be different, and there might be other things after it, so you might just as easily see something like:
depending on how your computer has been set up and what else you have recently done with it. Once you have started such a window, you are well on the way to running Python programs.
You need to realize that your Python scripts have to be processed by another program called the Python interpreter. The interpreter reads your script, compiles it into bytecodes, and then executes the bytecodes to run your program. So, how do you arrange for the interpreter to handle your Python?
First, you need to make sure that your command window recognises the word “python” as an instruction to start the interpreter. If you have opened a command window, you should try entering the command python and hitting return. You should then see something like:
Python 2.2 (#28, Dec 21 2001, 12:21:22) [MSC 32 bit (Intel)] on win32 Type "help", "copyright", "credits" or "license" for more information. >>>
You have started the interpreter in “interactive mode”. That means you can enter Python statements or expressions interactively and have them executed or evaluated while you wait. This is one of Python’s strongest features. Check it by entering a few expressions of your choice and seeing the results:
>>> print("Hello") Hello >>> "Hello" * 3 HelloHelloHello
Many people use the interactive mode as a convenient yet highly programmable calculator. When you want to end your interactive Python session, hold the Ctrl key down while you enter a Z, then hit the “Enter” key to get back to your Windows command prompt.
You may also find that you have a Start-menu entry such as Start ‣ Programs ‣ Python 2.2 ‣ Python (command line) that results in you seeing the >>> prompt in a new window. If so, the window will disappear after you enter the Ctrl-Z character; Windows is running a single “python” command in the window, and closes it when you terminate the interpreter.
If the python command, instead of displaying the interpreter prompt >>>, gives you a message like:
'python' is not recognized as an internal or external command, operable program or batch file.
Bad command or filename
then you need to make sure that your computer knows where to find the Python interpreter. To do this you will have to modify a setting called PATH, which is a list of directories where Windows will look for programs.
You should arrange for Python’s installation directory to be added to the PATH of every command window as it starts. If you installed Python fairly recently then the command
will probably tell you where it is installed; the usual location is something like C:\Python23. Otherwise you will be reduced to a search of your whole disk ... use Tools ‣ Find or hit the Search button and look for “python.exe”. Supposing you discover that Python is installed in the C:\Python23 directory (the default at the time of writing), you should make sure that entering the command
starts up the interpreter as above (and don’t forget you’ll need a “CTRL-Z” and an “Enter” to get out of it). Once you have verified the directory, you need to add it to the start-up routines your computer goes through. For older versions of Windows the easiest way to do this is to edit the C:\AUTOEXEC.BAT file. You would want to add a line like the following to AUTOEXEC.BAT:
For Windows NT, 2000 and (I assume) XP, you will need to add a string such as
to the current setting for the PATH environment variable, which you will find in the properties window of “My Computer” under the “Advanced” tab. Note that if you have sufficient privilege you might get a choice of installing the settings either for the Current User or for System. The latter is preferred if you want everybody to be able to run Python on the machine.
If you aren’t confident doing any of these manipulations yourself, ask for help! At this stage you may want to reboot your system to make absolutely sure the new setting has taken effect. You probably won’t need to reboot for Windows NT, XP or 2000. You can also avoid it in earlier versions by editing the file C:\WINDOWS\COMMAND\CMDINIT.BAT instead of AUTOEXEC.BAT.
You should now be able to start a new command window, enter python at the C:\> (or whatever) prompt, and see the >>> prompt that indicates the Python interpreter is reading interactive commands.
Let’s suppose you have a program called pytest.py in directory C:\Steve\Projects\Python. A session to run that program might look like this:
C:\> cd \Steve\Projects\Python C:\Steve\Projects\Python> python pytest.py
Because you added a file name to the command to start the interpreter, when it starts up it reads the Python script in the named file, compiles it, executes it, and terminates, so you see another C:\> prompt. You might also have entered
C:\> python \Steve\Projects\Python\pytest.py
if you hadn’t wanted to change your current directory.
Under NT, 2000 and XP you may well find that the installation process has also arranged that the command pytest.py (or, if the file isn’t in the current directory, C:\Steve\Projects\Python\pytest.py) will automatically recognize the “.py” extension and run the Python interpreter on the named file. Using this feature is fine, but some versions of Windows have bugs which mean that this form isn’t exactly equivalent to using the interpreter explicitly, so be careful.
The important things to remember are:
Start Python from the Start Menu, or make sure the PATH is set correctly so Windows can find the Python interpreter.
should give you a ‘>>>’ prompt from the Python interpreter. Don’t forget the CTRL-Z and ENTER to terminate the interpreter (and, if you started the window from the Start Menu, make the window disappear).
Once this works, you run programs with commands:
When you know the commands to use you can build Windows shortcuts to run the Python interpreter on any of your scripts, naming particular working directories, and adding them to your menus. Take a look at
if your needs are complex.
Interactive mode (where you see the >>> prompt) is best used for checking that individual statements and expressions do what you think they will, and for developing code by experiment.
On Windows 2000, the standard Python installer already associates the .py extension with a file type (Python.File) and gives that file type an open command that runs the interpreter (D:\Program Files\Python\python.exe "%1" %*). This is enough to make scripts executable from the command prompt as ‘foo.py’. If you’d rather be able to execute the script by simple typing ‘foo’ with no extension you need to add .py to the PATHEXT environment variable.
On Windows NT, the steps taken by the installer as described above allow you to run a script with ‘foo.py’, but a longtime bug in the NT command processor prevents you from redirecting the input or output of any script executed in this way. This is often important.
The incantation for making a Python script executable under WinNT is to give the file an extension of .cmd and add the following as the first line:
@setlocal enableextensions & python -x %~f0 %* & goto :EOF
Usually Python starts very quickly on Windows, but occasionally there are bug reports that Python suddenly begins to take a long time to start up. This is made even more puzzling because Python will work fine on other Windows systems which appear to be configured identically.
The problem may be caused by a misconfiguration of virus checking software on the problem machine. Some virus scanners have been known to introduce startup overhead of two orders of magnitude when the scanner is configured to monitor all reads from the filesystem. Try checking the configuration of virus scanning software on your systems to ensure that they are indeed configured identically. McAfee, when configured to scan all file system read activity, is a particular offender.
“Freeze” is a program that allows you to ship a Python program as a single stand-alone executable file. It is not a compiler; your programs don’t run any faster, but they are more easily distributable, at least to platforms with the same OS and CPU. Read the README file of the freeze program for more disclaimers.
You can use freeze on Windows, but you must download the source tree (see http://www.python.org/download/source). The freeze program is in the Tools\freeze subdirectory of the source tree.
You need the Microsoft VC++ compiler, and you probably need to build Python. The required project files are in the PCbuild directory.
Yes, .pyd files are dll’s, but there are a few differences. If you have a DLL named foo.pyd, then it must have a function initfoo(). You can then write Python “import foo”, and Python will search for foo.pyd (as well as foo.py, foo.pyc) and if it finds it, will attempt to call initfoo() to initialize it. You do not link your .exe with foo.lib, as that would cause Windows to require the DLL to be present.
Note that the search path for foo.pyd is PYTHONPATH, not the same as the path that Windows uses to search for foo.dll. Also, foo.pyd need not be present to run your program, whereas if you linked your program with a dll, the dll is required. Of course, foo.pyd is required if you want to say import foo. In a DLL, linkage is declared in the source code with __declspec(dllexport). In a .pyd, linkage is defined in a list of available functions.
Embedding the Python interpreter in a Windows app can be summarized as follows:
Do _not_ build Python into your .exe file directly. On Windows, Python must be a DLL to handle importing modules that are themselves DLL’s. (This is the first key undocumented fact.) Instead, link to pythonNN.dll; it is typically installed in C:\Windows\System. NN is the Python version, a number such as “23” for Python 2.3.
You can link to Python in two different ways. Load-time linking means linking against pythonNN.lib, while run-time linking means linking against pythonNN.dll. (General note: pythonNN.lib is the so-called “import lib” corresponding to pythonNN.dll. It merely defines symbols for the linker.)
Run-time linking greatly simplifies link options; everything happens at run time. Your code must load pythonNN.dll using the Windows LoadLibraryEx() routine. The code must also use access routines and data in pythonNN.dll (that is, Python’s C API’s) using pointers obtained by the Windows GetProcAddress() routine. Macros can make using these pointers transparent to any C code that calls routines in Python’s C API.
Borland note: convert pythonNN.lib to OMF format using Coff2Omf.exe first.
If you use SWIG, it is easy to create a Python “extension module” that will make the app’s data and methods available to Python. SWIG will handle just about all the grungy details for you. The result is C code that you link into your .exe file (!) You do _not_ have to create a DLL file, and this also simplifies linking.
SWIG will create an init function (a C function) whose name depends on the name of the extension module. For example, if the name of the module is leo, the init function will be called initleo(). If you use SWIG shadow classes, as you should, the init function will be called initleoc(). This initializes a mostly hidden helper class used by the shadow class.
The reason you can link the C code in step 2 into your .exe file is that calling the initialization function is equivalent to importing the module into Python! (This is the second key undocumented fact.)
In short, you can use the following code to initialize the Python interpreter with your extension module.
#include "python.h" ... Py_Initialize(); // Initialize Python. initmyAppc(); // Initialize (import) the helper class. PyRun_SimpleString("import myApp") ; // Import the shadow class.
There are two problems with Python’s C API which will become apparent if you use a compiler other than MSVC, the compiler used to build pythonNN.dll.
Problem 1: The so-called “Very High Level” functions that take FILE * arguments will not work in a multi-compiler environment because each compiler’s notion of a struct FILE will be different. From an implementation standpoint these are very _low_ level functions.
Problem 2: SWIG generates the following code when generating wrappers to void functions:
Py_INCREF(Py_None); _resultobj = Py_None; return _resultobj;
Alas, Py_None is a macro that expands to a reference to a complex data structure called _Py_NoneStruct inside pythonNN.dll. Again, this code will fail in a mult-compiler environment. Replace such code by:
It may be possible to use SWIG’s %typemap command to make the change automatically, though I have not been able to get this to work (I’m a complete SWIG newbie).
Using a Python shell script to put up a Python interpreter window from inside your Windows app is not a good idea; the resulting window will be independent of your app’s windowing system. Rather, you (or the wxPythonWindow class) should create a “native” interpreter window. It is easy to connect that window to the Python interpreter. You can redirect Python’s i/o to _any_ object that supports read and write, so all you need is a Python object (defined in your extension module) that contains read() and write() methods.
On the Microsoft IIS server or on the Win95 MS Personal Web Server you set up Python in the same way that you would set up any other scripting engine.
Run regedt32 and go to:
and enter the following line (making any specific changes that your system may need):
.py :REG_SZ: c:\<path to python>\python.exe -u %s %s
This line will allow you to call your script with a simple reference like: http://yourserver/scripts/yourscript.py provided “scripts” is an “executable” directory for your server (which it usually is by default). The -u flag specifies unbuffered and binary mode for stdin - needed when working with binary data.
In addition, it is recommended that using “.py” may not be a good idea for the file extensions when used in this context (you might want to reserve *.py for support modules and use *.cgi or *.cgp for “main program” scripts).
In order to set up Internet Information Services 5 to use Python for CGI processing, please see the following links:
http://www.e-coli.net/pyiis_server.html (for Win2k Server) http://www.e-coli.net/pyiis.html (for Win2k pro)
Configuring Apache is much simpler. In the Apache configuration file httpd.conf, add the following line at the end of the file:
Then, give your Python CGI-scripts the extension .py and put them in the cgi-bin directory.
The FAQ does not recommend using tabs, and the Python style guide, PEP 8, recommends 4 spaces for distributed Python code; this is also the Emacs python-mode default.
Under any editor, mixing tabs and spaces is a bad idea. MSVC is no different in this respect, and is easily configured to use spaces: Take Tools ‣ Options ‣ Tabs, and for file type “Default” set “Tab size” and “Indent size” to 4, and select the “Insert spaces” radio button.
If you suspect mixed tabs and spaces are causing problems in leading whitespace, run Python with the -t switch or run Tools/Scripts/tabnanny.py to check a directory tree in batch mode.
Use the msvcrt module. This is a standard Windows-specific extension module. It defines a function kbhit() which checks whether a keyboard hit is present, and getch() which gets one character without echoing it.
To terminate a process, you can use ctypes:
import ctypes def kill(pid): """kill function for Win32""" kernel32 = ctypes.windll.kernel32 handle = kernel32.OpenProcess(1, 0, pid) return (0 != kernel32.TerminateProcess(handle, 0))
Be sure you have the latest python.exe, that you are using python.exe rather than a GUI version of Python and that you have configured the server to execute
"...\python.exe -u ..."
for the CGI execution. The -u (unbuffered) option on NT and Win95 prevents the interpreter from altering newlines in the standard input and output. Without it post/multipart requests will seem to have the wrong length and binary (e.g. GIF) responses may get garbled (resulting in broken images, PDF files, and other binary downloads failing).
The reason that os.popen() doesn’t work from within PythonWin is due to a bug in Microsoft’s C Runtime Library (CRT). The CRT assumes you have a Win32 console attached to the process.
You should use the win32pipe module’s popen() instead which doesn’t depend on having an attached Win32 console.
import win32pipe f = win32pipe.popen('dir /c c:\\') print(f.readlines()) f.close()
There is a bug in Win9x that prevents os.popen/win32pipe.popen* from working. The good news is there is a way to work around this problem. The Microsoft Knowledge Base article that you need to lookup is: Q150956. You will find links to the knowledge base at: http://support.microsoft.com/.
This is very sensitive to the compiler vendor, version and (perhaps) even options. If the FILE* structure in your embedding program isn’t the same as is assumed by the Python interpreter it won’t work.
The Python 1.5.* DLLs (python15.dll) are all compiled with MS VC++ 5.0 and with multithreading-DLL options (/MD).
If you can’t change compilers or flags, try using Py_RunSimpleString(). A trick to get it to run an arbitrary file is to construct a call to execfile() with the name of your file as argument.
Also note that you can not mix-and-match Debug and Release versions. If you wish to use the Debug Multithreaded DLL, then your module must have an “_d” appended to the base name.
Sometimes, the import of _tkinter fails on Windows 95 or 98, complaining with a message like the following:
ImportError: DLL load failed: One of the library files needed to run this application cannot be found.
It could be that you haven’t installed Tcl/Tk, but if you did install Tcl/Tk, and the Wish application works correctly, the problem may be that its installer didn’t manage to edit the autoexec.bat file correctly. It tries to add a statement that changes the PATH environment variable to include the Tcl/Tk ‘bin’ subdirectory, but sometimes this edit doesn’t quite work. Opening it with notepad usually reveals what the problem is.
(One additional hint, noted by David Szafranski: you can’t use long filenames here; e.g. use C:\PROGRA~1\Tcl\bin instead of C:\Program Files\Tcl\bin.)
Sometimes, when you download the documentation package to a Windows machine using a web browser, the file extension of the saved file ends up being .EXE. This is a mistake; the extension should be .TGZ.
Simply rename the downloaded file to have the .TGZ extension, and WinZip will be able to handle it. (If your copy of WinZip doesn’t, get a newer one from http://www.winzip.com.)
Sometimes, when using Tkinter on Windows, you get an error that cw3215mt.dll or cw3215.dll is missing.
Cause: you have an old Tcl/Tk DLL built with cygwin in your path (probably C:\Windows). You must use the Tcl/Tk DLLs from the standard Tcl/Tk installation (Python 1.5.2 comes with one).
The Python installer issues a warning like this:
This version uses CTL3D32.DLL which is not the correct version. This version is used for windows NT applications only.
This is a Microsoft DLL, and a notorious source of problems. The message means what it says: you have the wrong version of this DLL for your operating system. The Python installation did not cause this – something else you installed previous to this overwrote the DLL that came with your OS (probably older shareware of some sort, but there’s no way to tell now). If you search for “CTL3D32” using any search engine (AltaVista, for example), you’ll find hundreds and hundreds of web pages complaining about the same problem with all sorts of installation programs. They’ll point you to ways to get the correct version reinstalled on your system (since Python doesn’t cause this, we can’t fix it).
David A Burton has written a little program to fix this. Go to http://www.burtonsys.com/downloads.html and click on “ctl3dfix.zip”.